Posted on :- 26 Apr 2024

Description

Product Info: Rinsing: Special grippers are used to catch the bottles from their brims and turn them 180°. In the rinsing part, water, sterile air, nitrogen, or a different liquid can be sprayed into the bottle, depending on the nature of the product to be filled. After the rinsing liquid is sprayed into the bottle for a certain period, the bottle goes upside down for a little more while to drain and then returns to its normal position. With the operation based on “No Bottle-No Spray,” the nozzles are activated only if there is a bottle on the grippers to save water. Filling: Bottles coming from the rinsing section are conveyed to the filling unit via a transfer star. The filling is done on a level basis under a low vacuum. When the bottle presses on the valve and sealing are achieved, the valve opens, and filling begins. When the level reaches the desired point (tip of the vacuum pipe), the excess product is taken from the air return path to a separate vacuum tank and from there it is regained back to the system. In this manner, even foamed products can be always filled to smooth and precise levels and product loss can be avoided. Capping: Various capping groups can be mounted on the mono-block body so that different caps can be attached such as Plastic screw caps and Aluminum screw caps. Optionally, two different capping units can be mounted on the same mono-block body.